9 lambda was, 10 viewing live pin voltage values – MoTeC M1 Tune User Manual User Manual
Page 55
![background image](/manuals/322359/55/background.png)
User Manual
USING M1 TUNE
Printed documents are not controlled
Page 54
11.9
LAMBDA WAS
If the fuel table needs to be tuned from data either offline or offsite, the "
L
" ( Lambda Was)
function can be used.
This function works exactly the same as "
Q
" does but with user entered lambda values. When "
L
" is pressed, a window prompts for the user to enter the recorded lambda value, rather than
using a recorded value.
11.10 VIEWING LIVE PIN VOLTAGE VALUES
At times it is necessary to know the actual voltage that is on a particular pin, whether that is an
input or an output.
Note:
If connected to an ECU, all voltage values shown are instantaneously updated in
real time.
1. Select menu
Online
»Monitor Inputs / Outputs
.
►
The
Monitor Input/Output window displays showing the Digital Input tab, for example:
2. Select the Analogue Inputs tab to display all analogue pin voltages, for example: