MoTeC VCS - Manual (Page 15)

MoTeC Configuration 11
Audio Settings
Mono check box
Select the Mono check box to record both left and right audio channels from
the same (AV1) microphone input. This results in sound on both channels for
playback.
Clear the Mono check box to use two independent microphone inputs; AV1 for
the left channel and AV2 for the right audio channel.
Mic Gain
Mic gain can be used to improve audio quality. The volume of the recorded
audio can be reduced in noisy environments or increased in quiet
surroundings. The gain is applied to both microphone input channels.
On Screen Displays Setup
Gauges
The on-screen gauges can be positioned on the Top or the Bottom of the
screen.
Gauge Set
There are three gauge sets available, Small, Medium and Large.
The Small gauge set includes two gauges (default Speed and RPM), a red
and a green bar graph (default Brake and Throttle) and a centre numeric
display (default Gear).
Note: Brake bar not displayed