Deployment system – Neff C77V60N2 User Manual

Page 36

Advertising
background image

Neff

C77V60N2 | 03/2011

36 | English

Retracted: The appliance is in “energy sav-

ing mode”. After the appliance has been

switched to “energy saving mode” it rinses,

unless coffee has not been dispensed.

The appliance is ready for use when the drink

selection menu is shown in the display (3).

Press the navigation button in the required

direction to enter or change settings (e.g.

coffee strength or per-cup quantity).

Even when in “energy saving mode”

the appliance recognizes when

the drip tray unit (18) has been

removed.

5

Z

: This button is used to navigate

downwards in the display (3). The cur-

rently active menu item is shown in a

larger font.

6 Start/Stop

z

: This button is used

to start drink preparation or to start a

service programme.

Press

z

(6) again during drink prepa-

ration to stop the dispensing process.

Deployment system

The appliance can be pulled out of the built-

in unit automatically. To do this,

X

press deployment button (16) (appliance

must be switched on for this) or

16

X

remove grate and pull on the handle

underneath which is now accessible:

The appliance now moves automatically into

deployment position 1. In this position it can

be fi lled with water, coffee beans, ground

coffee and cleaning/descaling tablets, and

the accessories on the right of the appliance

can be removed.

To pull the appliance out fully,

X

press deployment button (16) again and

pull the appliance out by hand into posi-

tion 2 or

X

pull the appliance out fully by the handle.

In deployment position 2 the brewing unit

can be removed and the grinding unit

adjusted.

Deployment position 1 Deployment position 2

Then push the appliance back fully into the

built-in unit.

During the brewing process, auto-

matic deployment is prevented.

Advertising