Service programmes, Descaling – Neff C77V60N2 User Manual

Page 51

Advertising
background image

Neff

C77V60N2 | 03/2011

English |

51

Service programmes

At certain intervals, depending on how the

appliance is used, the display will show one

of the following texts instead of the coffee

selection:

Service - change filter

i - button 3 sec.

Service - clean

i - button 3 sec.

Service - descale

i - button 3 sec.

Service - Calc‘n‘Clean

i - button 3 sec.

Then the water filter should be changed

immediately or the appliance cleaned or de-

scaled using the corresponding programme

(described on the next pages). Otherwise

the appliance may be damaged.

The service programmes can also

be started manually in the settings

menu (see “Displaying settings”).

Do not drink the liquids. Never use vinegar,

vinegar-based products, citric acid or citric

acid-based products for descaling. For

cleaning and descaling only use the tablets

intended for such. They were specially

developed for this fully automatic espresso

machine, and replacements are available

from retailers or customer service (see

“Accessories”).

Never put descaling tablets or any other

descaling agents in the drawer (10) for

ground coffee.

If there is a filter in the water

tank (8), it needs to be removed

before the service programme is

run and should only be replaced

once the programme is finished.

Never interrupt the service programme.

If one of the service programmes is inter-

rupted, e.g. by a power outage, proceed as

follows:

1. Rinse the water tank (8) and refill it with

fresh water up to the “max” mark.

2. Press

z

(6). The cleaning programme

will now run for about 3 minutes:

Cleaning

The appliance is ready for use again.

Descaling

If the prompt

Service - descale

is dis-

played, press and hold down

i (1) for at least

three seconds. The display shows:

Descale

Press

Y

or

To start without the prompt (see “Displaying

Settings”) press and hold down

i (1) for at

least three seconds and select

Descale

Press

Y

Press

z

(6). The display will guide you

through the programme.

Empty drip tray

Empty the drip tray (18).

Replace drip tray

Replace the drip tray.

If the milk frother is not inserted, the

following message is displayed:

Set up milk frother

Insert the milk frother (19).

Advertising