Castle TSM-12 - Manual (Page 16)

Included with your machine is a template for cutting out a cover for the bottom of your TSM-12,
necessary for creating a vacuum for pulling dust and air out of the case. Using the template
provided; cut out a cover for the hole in the bottom of the case from any 1/8” thick material.
CASTLE, INC TSM‐12 OWNERS MANUAL V1.0 Page 16 of 23
At the underside opening of the case, slip the clips (part # F11010) over the holes provided with
the flat face of the clips facing out. Use the screws (part # F10038) included with the clips to
secure the 1/8” thick base cover to the base at the clips.
Fig 25
Fig 26