Castle TSM-12 - Manual (Page 6)

2.2 Inventory
Your TSM-12 will pocket any material you would normally rout. It is designed for material from
½” to 1 ½”. Use of materials thinner than ½” is not recommended. Every TSM-12 machine is
factory adjusted. If you should find a small amount of sawdust in the bottom of your TSM-12,
please don’t be alarmed. This is an indication that your machine has been factory tested prior to
shipping.
Within your Castle machinery shipment, you should receive the following:
CASTLE, INC TSM‐12 OWNERS MANUAL V1.0 Page 6 of 23
Fig 1
CASTLE TSM-12 BENCH-TOP POCKET MACHINE SHIPPING INVENTORY
Part # Part Description Qty
---- TSM-12 Case 1
E21617 Router Motor - Bosch 2.0hp #1617 1
E21610 Drill Motor - Bosch Colt 1.0hp #PR10E 1
S90011 TSM-12 Operator Manual with Warranty Activation Card 1
---- - Bottom Template & Hardware (3 clips & 3 screws) 1
V11001 TSM-12 Work Top 1
H11001 Non-Slip Machine Feet 4
---- Hardware Pack (image of contents and inventory below) 1