Castle TSM-21 Serial 61064 and lower (Mead) Operator Manual User Manual
Page 2
Table of Contents
Safety Notification_______________ Page 1
Machine Inventory_______________ Page 2
Machine Requirements____________ Page 2
Setting Up______________________ Page 3
Operating Instruction_____________ Page 5
Machine Adjustments
Router Feed Rate Adjustment____________ ___
6
Drill Feed Rate Adjustment_________________
7
Pilot Drill Depth Adjustment________________
7-8
Pilot Hole Height Adjustment_______________
8
Pocket Depth Position__________________ ___
9
Pocket Distance Adjustment_____________ ___
9
Changing the Bits on your Machine __________
10
Definition and Description of Parts__ Page 12-13
Maintenance
Machine________________________________ 14
Motors
and
Bits_______________________
___
15
Troubleshooting
Machine Will Not Start The Cycle___________
16-17
Clamp Is Releasing Slowly_________________
18-20
The Router Cuts The Pocket But The
Clamp Doesn’t Release____________________
20
The Pocket Is Being Cut And The Drill
Comes Up But Doesn’t Finish The Pilot Hole___
21-24
Warranty Information_____________ Page 25