J&M GRAIN CARTS Leaner Setup - Manual (Page 2)

LEANER SETUP MANUAL
STEP - 1.0
NOTE
FOR CARTS WITH THE TARP OPTION:
The boxed in area shown above is to show which bolt holes should have rounded head bolts
placed in them during assembly. Use rounded head bolts at any location where it is possible that
the tarp may hit the bolt head to avoid damage to the tarp during use.
-1-
Detail # Description Quantity
1 3/8”-16 x 1” serrated flange hex bolt 118
2 3/8”-16 x 1” serrated flange hex nut 108
3 3/8”-16 x 1” centerlock hex nut 10
NOTE: This is a general list of parts for a leaner. Some of these will be already installed on arrival
or installed in sideboard set up. The purpose of this list here is to provide a visual aid along with the
previous page.