J&M 500ST Remote User Manual
Page 3
MEGA REMOTE
2
DESCRIPTION
The MEGA REMOTE is a state
of the art microprocessor
based Radio Frequency (RF)
control system. It will provide
the operator the ability to
wirelessly operate equipment.
The operator is required to
follow all OSHA
www.osha.gov
safety standards when
operating the equipment.
The remote control system
consists of the handheld radio
transmitter and receiver
module.
Additional optional
equipment such as wiring
harnesses and Palm™
interface tools may be
available.
The transmitter is equipped
with pushbutton switches for
the various functions and an
LCD display to show
equipment functions and
status. The transmitter runs
on 2 AA alkaline batteries.
The system’s radio receiver
has ON/OFF
outputs to
accommodate the functions
available on the transmitter.
All outputs are current-
sourcing. It also includes a
port for RS-232
communication, used for
linking external equipment to
the receiver and performing
any software updates via the
optional Palm interface tool.
TRANSMITTER AND
RECEIVER
SYNCHRONIZATION
Each radio remote system is
designed to operate with a
unique radio ID code and RF
channel sequence. Each
receiver is programmed to
respond
only to the