J&M 500ST Remote - Manual (Page 7)

MEGA REMOTE
6
manual.
OPERATION
Power must be applied to the
receiver module for the
system to work.
Pressing the POWER button
will turn on the transmitter.
Pressing and holding the
POWER button until the LCD
display goes blank will turn off
the transmitter. If the
transmitter goes out of range
for more than 2 seconds, all
latched outputs will turn off as
a safety feature.
Use the buttons on the
keypad to operate the desired
functions.
To save battery life, the
transmitter will turn off when
it is idle (no functions are
used) for period greater than
15 minutes. The user must
press the POWER button at
this point to restore
transmitter operation.
The transmitter will NOT go
to sleep as long as the
receiver has power applied
to it.
Tare
In order to tare the unit, hold
down the TARE pushbutton on
the weight screen for 3
seconds.
Weight to dispense
In the Weight To Dispense
screen, to set the default
Weight To Dispense press
and hold the SCROLL
pushbutton for 3 seconds. The