Hunter 99023 Bowl Light Fitter - Manual (Page 7)

MA003-01 • 07/24/13
1.888.830.1326
7
Installing the bulb - Install a bulb
into each socket. When necessary,
replace bulbs with bulbs of same
type and wattage.
Socket
If necessary, attach the extension chain
provided to the fan pull chain coming
from the switch housing. Then feed the
end of the extension chain through the
grommeted hole in the light kit.
Grommeted
Hole
Light Pull
Chain
Fan Pull
Chain
TYPE-B ASSEMBLY INSTRUCTIONS (CONTINUED)
Installing the pull chain pendant -
Attach the pull chain pendants to the
end of the short chains coming from the
switch housing and the light kit. Turn
power on. Your installation is complete.
Installing the globe - Press the globe and
globe keeper flush against the metal plate.
Thread the light pull chain through the hole
in the center of the finial cap and thread
the fan pull chain through the hole in the
side of the cap. Finally, thread only the light
pull chain through the hole in the finial and
screw the finial onto the threaded rod.
Globe
Globe
Keeper
Finial Cap
Finial
6 5
7 8