CEMB USA C65 (G) User Manual
Page 7
I 0559 - 7
2
GB
5 - Indications and use of the wheel balancer
The monitor shows several information and suggests various alternative ways of use to the operator.
This is through various “screens”.
5.1 - Initial screen
Buttons enabled
: main functions screen (see
MENU ACCESS DIAGRAM
)
: type of correction (see
ALU AND STATIC MODES
)
: balancing spin (see
RESULT OF MEASUREMENT
)
Dimensions gauge: when extracted, the Dimensions screen is selected (see
PRESETTING OF WHEEL DIMENSIONS
).
If the machine remains on the initial screen for a certain amount of time without being used, the system is automati-
cally switched to a screen-save. Striking of any key, movement of the wheel of distance + diameter gauge will cause
automatic switching from the screen-save menu to the initial screen.
5.1.1 - Screen-save screen
N.B.: Name of the wheel balancer’s owner. Can be preset via the monitor (see section
PRESETTING THE CUSTOMER
AND USER NAME
).
Static