CEMB USA C206 (A) - Manual (Page 17)

I 0638 - 17
10 11
GB
6.3 - AUTOMATIC GAUGES CALIBRATION
6.3.1 - RIM DISTANCE GAUGE
- Leave the distance gauge in rest position and press (fi g. 10)
- Bring the gauge in contact with the fl ange surface and press (fi g. 11)
CORRECT CALIBRATION
- Return the gauge to rest position
- The wheel balancer is ready for operation.
N.B.: In the event of errors or faulty operation, the writing
“r.P.”:
ap pears on the display : shift the gauge to the
rest position and repeat the calibration operation exactly as described above. If the error persists, contact the
Technical Service Department. In the event of incorrect input in the rim distance gauge calibration function,
press to cancel it.