CEMB USA C29 (A) - Manual (Page 10)

cm
A B
I 0337 - 10 I 0337 - 11 GB GB
5.1.2 - Presetting with gauge extension
The extension increases the distance measuring range of the gauge by 6 cm (fig. A) and allows measuring the
distance also when the rim is of special shape (fig.B).
Proceed as follows:
- Insert the extension on the distance gauge.
- Measure the distance as already described in the above procedures.
- After reading value “a” on the scale, return the gauge to “0” and preset the value “a + 6” in manual mode.
- Preset the diameter and width in manual mode.
Extension + 6
5.1.3 - Double operator program
This program allows memorizing the dimensions of two types of wheels. Thus two operators can work simultaneously
on two differents cars using the same balancing machine. The system memorizes two programs with various present
dimensions.
1 - Press to select operator (1 or 2). Selection is confirmed by panel-mounted Led.
2 - Enter the dimensions (see PRESETTING OF WHEEL DIMENSIONS ).
3 - Perform a manual spin to store the program.
With program 1 or 2 is called for subsequent balancing operations without having to newly enter the
dimensions.