CEMB USA C29 (A) - Manual (Page 9)

+
6
I 0337 - 8 I 0337 - 9 GB GB
b)
0 gauge
Note: not setting dE as it is automatic, dE = d - 2”
5.1.1 - Dimensions unit of measure
The distances are always expressed in mm. To set the diameter or width in mm press the
button when the
current diameter or width value is shown on the display. Default always in inch.
Balancing of alloy rims with hidden application of the outside adhesive weight.
The position of the weights can be set.
On the measurement screen, press the button :
- Measuring:
(Nominal)
Inside
- Setting: