CEMB USA C72 (B) - Manual (Page 24)

I 0307_0308 - 24
GB
6.4 - TYPE OF DISPLAY OF UNBALANCE PHASE
The type of display of the unbalance phase can be selected, different from what is described in the
manual to date.
Changing the type of display of the unbalance phase.
CONFIRMATION
In this case the unbalance phase is indicated in the following way:
MEASURING RESULT
Inside correction Outside correction
- MEASURING RESULT OF SPLIT UNBALANCE:
Each weight to be applied has its own display (1 for the inside and 2 for the outside in ALU S).
Unbalance inconsistent NOT in position
Correction position 1
Correction position 2
N.B. The standard type of display is type 1, i.e. that
described throughout the manual.