CEMB USA N500 - Manual (Page 14)

2 - 6
Ge
neral layout
Use of the cursor
For easier reading and interpretation of the displayed data, it is possible to introduce
a cursor in any graph, provided the visible region is not blank:
this can be done with
. A window at the top right corner of the graph
contains the co-ordinates of the point where the cursor lies.
The cursor can be shifted by one step to the right or to the left by using the
following keys or respectively .
For quick reaching of points from the current position, hold down
or
. With the cursor is removed.
N.B.
Measurement can started with also while the cursor is visible; at
the end of the measurement, the cursor remains visible.
N.B.
When two graphs are represented on the same screen simultaneously, it is possible
to display the cursor on both in order to have easier comparisons and assessments.
However, pressing of the function keys will only have effect on that of the
currently activated graph (identified by the symbol ).
To change the activated graph, proceed to press the key .