CEMB USA N500 - Manual (Page 63)

CEMB PoInTer program 9 - 1
Chapter 9
CEMB PoInTer Program (optional)
The data collected and memorized with the N500 instrument can readily imported to a PC
(directly or using a USB key), and subsequently analyzed, processed, compared, printed.
Such operation is considerably facilitated by using the CEMB PoInTer (Portable
Instruments Terminal) software, available for Windows operating systems.
Its main page
1 2 3
can be imagined as being subdivided into three zones, which allow the following items to
be controlled respectively:
1 – archive of measuring points
2 – measurements available for the point selected
3 – list of measurements to be plotted in a graph
System requirements
Installation and use of the CEMB PoInTer program require:
- processor: at least Intel Pentium IV 1GHz or equivalent Athlon;
- memory: 512MB (recommended: 1GB or higher);
- disk space: at least 300MB free before installation (this does not include the space
occupied subsequently by the data archive);
- Operating system:
- Microsoft Windows 2000 at least Service Pack 4
- Microsoft Windows XP at least Service Pack 2
- Microsoft Windows Vista
- Display resolution 1024x768 or higher