CEMB USA N500 - Manual (Page 16)

2 - 8
Ge
neral layout
List of peaks
When this function is selected, a table appears with the 10 peaks of highest value present in
the zone of the spectrum displayed, and associated with the corresponding frequencies.
Their value is calculated by applying an interpolation algorithm to the FFT graph; this also
allows identifying peaks not situated in correspondence to one of the lines of the spectrum.
When is pressed, the system quits this function and again displays the graph (or
graphs).
N.B.
The 10 highest peaks are determined in relation to the highest value present in the
spectrum; hence in certain cases the list could contain less than 10 peaks.
N.B.
If graphs of both channels are displayed, the list of peaks should be calculated for
the active one (identifiable by the symbol
).