CEMB USA N500 User Manual
Page 31
Vibrometer mode
5 - 7
Monitoring is stopped by a further pressing of
and the typical graph control
functions become available (see 2-5 Functions operating on the graphs).
- Set scale
- Show cursor
- Change of channel displayed
-
List of peaks
When is pressed, the entire monitoring can be saved in a file for subsequent
analysis.
When the acquisition is enabled for both channels, the data save is performed automatically
for both channels in the same file.
N.B.:
The memory allotted for a single monitoring, allows memorizing a maximum of
1024 values per channel: when the limit is reached, the acquisition is stopped
automatically without data loss. For this reason, it is important to use the most
suitable frequency according to the duration of the phenomenon concerned.