CHIEF KSA1020 - Manual (Page 7)

Installation Instructions KSA-1020
7
3. Drill two 7/64" diameter pilot holes at marked spots into
wood stud. (See Figure 8)
Figure 8
4. Install two #12 x 2-1/2" Phillips wood screws (G) through
bracket and drywall into wood stud. (See Figure 8)
5. Ensure bracket is vertical, then tighten screws (G).
NOTE: Proceed to Installing CPU Mount to Wall section to
complete installation.
2
3
(G) x 2
mounting bracket