Climacool rigging and lifting – ClimaCool IOM AR2 SERIES User Manual
Page 8
Advertising
6
www.climacoolcorp.com
®
The ClimaCool Modular Chiller Rigging and
Lifting Procedures
Rigging Plates (Figures 1 and 2)
For overhead lifting, (2) rigging plates are provided with the
module for lifting at the electrical box end, at the position
shown . A spreader bar should be utilized when rigging with
sound attenuation covers in place .
ClimaCool Rigging and Lifting
Lifting and Transporting Modules (Figure 3)
When lifting and transporting the module, it is very important
to proceed as shown at right . Use of any other means for lifting
and transporting may damage the module .
CAUTION
Units are top heavy . Please use caution when rigging
or moving .
Advertising