Analog Way Pulse LE - Manual (Page 21)

The Pulse LE rear panel is equipped with 6 universal digital and analog inputs. Inputs #1 through #4 (4) are
universal analog inputs. Inputs #5 & #6 share a DVI-D signal and a universal analog signal (plug the shipped
Analog Way DVI/DB15 adaptor cable to use DVI-D and analog signals simultaneously).
The Main and Preview (7) outputs will allow for the Pulse LE high resolution digital and analog signals to be
viewed on screen and/or on a preview monitor (see also Output Specifications in this chapter).
Finally, the audio in and output card will let users trigger audio with any source, accurately balance or tweak
sound sources and outputs.
1 : AC outlet and On/off switch
2 : RS232 connector
3 : IP-LAN connector
4 : Universal Analog inputs
5 : DVI-D inputs
6 : HD-SDI inputs
7 : Main and Preview outputs
8 : Audio inputs
9 : Audio outputs
Overview
3-2. THE PLS200 REAR PANEL
20