Analog Way Pulse LE - Manual (Page 45)

1/ Click on the Image tab of the RCS interface. The empty Image
screen will appear on screen.
2/ By clicking on the drop-down menu in the Preview section, situated
next to the layer you wish to use as a PIP, you will access the
image parameters of the PIP source you select (#1 to #10).
3/ Set the desired PIP attributes (size, position, zoom, border,
transparency...).
4/ Click the Image tab to return to the main screen.
The Pulse LE offers a wide variety of transitions between the scenes
you create for your shows and events. It allows for live recall of
4 user presets, each of which you can edit at any given time.
1/ In the Layer Selection section, click the PIP button. On your Preview
screen, PIP1 will appear as a color rectangle. The parameters of
the layer will automatically appear in the RCS Preview section.
2/ At the bottom of the Preview section, click on the Transition tab,
then select the transition type from the left dropdown menu, and
the effect behaviour from the right dropdown menu.
3/ Determine effect duration by sliding the duration bar left (shorter)
or right (longer), or by manualy setting the value in the duration
value box.
4/ Repeat the procedure in the Closing Effect tab to determine the
way your layer will close.
The Pulse LE allows the creation of user defined presets very easily.
Any setup you have configured on screen, can be stored into one of
the 4 available user presets.
1/ After having configured layers, PIP transitions, logos... on your
screen (see “Working With the RCS” chapter), click on one of the
four available Preset buttons.
2/ In the dropdown menu, choose Save From Main or Save From Preview
to determine which screen you want to memorize the preset from.
3/ By clicking one of the two options, the RCS will automatically load
and preview the selected Preset.
4/ Click the Take button to view your preset on the Main screen.
PIP configuration
Layer transitions & effects
Creating presets
44