Analog Way Pulse LE - Manual (Page 34)

To configure audio settings of the Pulse LE, plug all audio inputs
into the device, and navigate to the Audio menu.
1/ Choose the audio mode, Break Away or Top Layer Follow, which
you wish the audio to work in.
* NOTE * : the Break Away mode will air the selected audio source,
while the Top Layer Follow mode will air audio from the top most
active layer of the Pulse LE.
2/ Select Source Settings from the Audio menu to select the audio
source you wish to work with, then set levels and left/right balance
for each input.
3/ Select Auxiliary Settings to determine level and balance of the
auxilary input.
4/ Select the Main Output menu to determine main audio output
level, balance and delay settings, or to mute main audio output.
5/ Select Audio Prelist, from the Audio menu, to determine pre-
listen audio output level, balance and delay settings, for each
audio input, or to mute Prelist audio output.
6/ Select Delay Mode, to determine how the Pulse LE deals with
audio delay. Select Auto Adjust to let the Pulse LE determine
audio output delay. Select Manual Adjust to determine audio
delay manualy.
*NOTE* : selecting Manual Adjust will give access to audio delay
value (in milliseconds) of the main audio output menus.
Audio configuration
33