Analog Way Quattro Value - Manual (Page 19)

IMPORTANT : The CUT, FADE, PIP and TITLE effects are active in SEAMLESS mode and only between the
reference computer input and the other inputs.
• CUT (SEAMLESS) :
1) Pre-select the reference computer input with the INPUT SELECTION button (The LED is blinking).
2) Select an EFFECT PRESET, assign it the CUT effect. Then press TAKE. The reference computer
input is then displayed onto the main output.
3) Pre-select another input then press on TAKE. The transition operates seamlessly.
• FADE :
1) Pre-select the reference computer input with the INPUT SELECTION button (The LED is blinking).
2) Select an EFFECT PRESET, assign it the FADE effect. Then press TAKE. The reference computer
input is then displayed onto the main output.
3) Pre-select another input then press TAKE again. The transition operates with a fading between the
two sources.
• TITLE :
The TITLE effect allows to insert text onto another source (video or computer). This effect is only active
between the reference computer input and the other inputs.
Create the text to be displayed on the computer used as the reference input, using software such as Power-
Point® : the text should be bright (yellow, white...) on a black background.
a) Display the main background source on the main output.
b) Pre-select the reference computer input (input #1).
c) Select an EFFECT PRESET, then assign it the TITLE effect.
d) Then, press TAKE. The text appears onto the displayed image.
NOTE : To turn OFF the text, press TAKE again.
NOTE :
a) For a better readability, you can display a shadow bar onto your text (EFFECT > title > intensity).
b) To turn OFF the text, press TAKE again.
c) To switch between sources without turning OFF the text, press the button of the desired source and
press TAKE. The transition operates with a fade color.
PAGE 18
TITLE TITLE
Main source (Input #3) Title source (Input #1) Displayed image (MAIN)
a)
b) c)