Safety instructions – Analog Way Quattro Value User Manual
Page 4
SAFETY INSTRUCTIONS
All of the safety and operating instructions should be read before the product is operated and should be retained for
further reference. Please follow all of the warnings on this product and its operating instructions.
CAUTION :
•
WARNING :
To prevent the risk of electric shock and fire, do not expose this device to rain, humidity or
intense heat sources (such as heaters or direct sunlight). Slots and openings in the device
are provided for ventilation and to avoid overheating. Make sure the device is never placed on
or near a textile surface that could block the openings. Also keep away from excessive dust,
vibrations and shocks.
•
POWER CORD. : Use the On (I) / Off (O) switch to power On or Off devices equipped with that switch. All other
devices should be plugged and unplugged from wall outlet. In both cases, please follow these
instructions :
1. The power cord of the device should be unplugged from the outlet when left
unused for several days.
2. To unplug the device, do not pull on the power cord but always on the plug itself.
3. The outlet should always be near the device and easily accessible.
4. Power supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them.
If the power supply cord is damaged, unplug the device. Using the device with a damaged
power supply cord may expose you to electric shocks or other hazards. Verify the condition of
the power supply cords once in a while. Contact your dealer or service center for replacement
if damaged.
•
CONNECTIONS : All inputs and outputs (except for the power input) are TBTS defined under EN60950.
•
SERVICING :
Do not attempt to service this product yourself by opening or removing covers and screws
since it may expose you to electric shocks or other hazards. Refer all problems to qualified
service personnel.
•
OPENINGS :
Never push objects of any kind into this product through the openings. If liquids have been
spilled or objects have fallen into the device, unplug it immediately and have it checked by a
qualified technician.
PAGE 3