Analog Way Quattro Value User Manual

Page 30

Advertising
background image

4►[IMAGE] + ENTER.

If the selected input type is a VIDEO signal the IMAGE MENU displays the following items :

4-1

[

Pos. settings

]

+ ENTER.

Select one of the following functions with ◄► + ENTER.

4-1-1 [H position] + ENTER.

Adjust the Horizontal position with ◄► + ENTER.

4-1-2 [V position] + ENTER.

Adjust the Vertical position with ◄► + ENTER.

4-1-3 [H size] + ENTER.

Adjust the Horizontal size with ◄► + ENTER.

4-1-4 [V size] + ENTER.

Adjust the Vertical size with ◄► + ENTER.

4-2

[

Aspect in

]

+ ENTER.

Select the Aspect Ratio of your input source with ◄► + ENTER.

• [

4/3 standard] : 4/3 input format.

• [

16/9 letterbox] : Letterbox input format.

• [

WS anamorphic] : Widescreen Anamorphic input format (video) or 16/9 input format (computer).

4-3

[

Aspect out

]

+ ENTER.

Select one of the following output aspect ratio with ◄► + ENTER.

• [

Standard] : The entire image and the aspect ratio are preserved.

• [

Crop] :

The image is zoomed without deformation to fill the screen, but some borders of the image will

be cropped. The aspect ratio is preserved.

• [

Full Screen] : The image is stretched to fill the screen. The aspect ratio is not preserved.

• [

Zoom] :

The image can be zoomed, cropped and stretched at your convenience.

4-4

[

Brightness

]

+ ENTER.

Adjust the Brightness with ◄► + ENTER.

4-5

[

Contrast

]

+ ENTER.

Adjust the Contrast with ◄► + ENTER.

4-6

[

Color

]

+ ENTER.

Adjust the Color with ◄► + ENTER.

4-7

[

Hue

] + ENTER.

Adjust the Tint of the picture (NTSC only) with ◄► + ENTER.

4-8

[

U/overscan

]

+ ENTER.

Select Underscan or Overscan with ◄► + ENTER.

• [underscan] : Underscan mode. The entire image is visible on the screen. Computer mode is underscan.

• [overscan] : Overscan mode. The image is displayed about 8 % bigger than in underscan mode, to avoid

seeing the corners and the borders. Standard TV display mode is overscan.

4-9

[

Preset

] + ENTER.

This function allows setting all the image parameters to the factory settings. Select [YES] and validate with ENTER.

PAGE 29

Advertising