Dynasonics DXN Portable Ultrasonic Measurement System - Manual (Page 33)

Status Bars
The status bar arrow key, in the bottom left corner, controls which of the available status bars are displayed . Single presses to
the status bar arrow key will scroll through the various functions the status bar controls or displays.
TT ‘Ducer Spacing: 0.86 = 0-27/32”: Z Mode
Raw Delta Time 0.000 ns
Raw SS Offset 0.000 us
<< Press button to begin Guided Setup Wizard
Battery: 35%, -1.0A, 42.0C PC CPU: 12% 138MB 54C
Site Name 0.00 GPM
ORDEM & PR OGRE SSO
Flow Meter Quick Status Bar
Transit Time Setup Status Bar
> > > Slide To Shut Down > > > Shutdown Bar
Setup Wizard
Power and Activity Status Bar
Version H ©2012 Dynasonics About Status Bar
Status Bar
Arrow Key
3/28/2012
13:24 Site Name 0.00 GPM
Begin Wizard
Figure 40: Status Bars
The Flowmeter Quick Status Bar also has a segment that does double duty as a button that functions as a toggle as well.
0.00 GPM Full Screen On/Off
Figure 41: Status Bar Button
The left most segment of the Flowmeter Quick Status Bar turns on/off Full Screen mode when pressed. The Quick Status Bar
also has a number of shortcuts leading to some of the most referenced menu screens.
The Battery icon brings up the System>Power screen showing real time battery condition.
The Communications icon brings up the System>Comm screen showing continuous data being output to the
active serial port.
The Datalogger shortcut reveals the Log>Setup control screen allowing quick access to the datalogger
controls.
Installation & Operation Manual
Page 33 February 2013