Dynasonics DXN Portable Ultrasonic Measurement System - Manual (Page 88)

APPENDIX B: UPGRADING SOFTWARE
IMNOOTNO
I
The Dynasonics USB Flash Drive is formatted in FAT/FAT32. NTFS (New Technology File System) formats will not work.
The upgrade is supplied as a self extracting zip file and must be expanded on a PC before it can be loaded into the DXN.
1. Save the supplied zip file to a convenient place on the computers hard drive.
2. Double-click on the DXN_Updater_R_x.zip file to start the extraction process. The completed extraction places the
folder PortableFlowmeter on the hard drive. This is the folder that needs to be copied to the USB thumb drive.
Name Date modified Type Size
PortableFlowmeter 11/29/2011 8:11 AM File Folder
NOTE: N
The “x” in the filename stands for the current revision letter.
3. When the extraction process is complete, copy the files to a USB thumb drive.
4. Start the DXN and allow it to get to the Display>Meters screen.
Site Name 0.00 GPM
3/28/2012
13:24
Meter Adv Cal System Display Site Log I/O
Alerts Table Graph Setup Graph Meters
Flow
0.00
GPM
Totalizer NET TT Quality
0.00
Gallons
0
%
NOTE: N Revision E and later of the DXN firmware has multi-language capabilities. Tabbed information can be shown in a
variety of languages. To change the language displayed on the menu tabs, push the flags icon on the System > Misc
screen until the desired language appears. Alternately press the drop-down list button and all available languages
are shown in a drop-down combo box.
System Site I/O Cal Adv Display Meter Log
Misc Comm Update Storage ENet PC Disk Time Power
English
ORDEM & PR OGRE SSO
Flag Icon
Button
Drop-Down
List Button
5. Insert the thumb drive into the USB port on the rear of the DXN.
6. From the Display>Meters screen, press the System tab on the far right of the display.
7. Select System>Update.
8. Press the Quit Meter to Manage / Update button.
DXN Portable Ultrasonic Measurement System
Page 88 February 2013