Dynasonics DXN Portable Ultrasonic Measurement System - Manual (Page 34)

DISPLAY GROUP
Meter Adv Cal System Site Log I/O Display
Alerts Graph Meters Graph Setup Table Alerts Graph Meters Graph Setup Table
Figure 42: Display group
Meters Page
The Meters page displays system data, such as the current reading and units of measurement.
Site Name
3/28/2012
13:24
Meter Adv Cal System Display Site Log I/O
Alerts Table Graph Setup Graph Meters
0.00
GPM
Flow
Meters On
Screen Button
Combo Box
Control
Full Screen
Button
Metering
Parameter
Current
Value
Metering
Units
Home
Button
Meters
0.00 GPM
Figure 43: Display>Meters
The DXN can show up to 4 different parameters sub screens on the main screen. The number of individual sub screens shown
is controlled by the Display>Meters button.
To change the number of sub screens shown:
1. Tap the Meter's group tab until the desired amount of screens is shown.
2. Click the Full Screen button on the Flowmeter Quick Status Bar to turn the full screen function on or off (see
Figure 41 ).
NOTE: N
Currently you can see 1, 3, or 4 meters on the screen at a time.
The metering parameters displayed can be changed by clicking on the combo box in the upper left corner of each screen or
sub screen. When the down arrow key is pressed a drop down menu becomes available allowing the choice of parameter to
be displayed on that screen or sub screen. Figure 44 shows an example of the drop down menu.
DXN Portable Ultrasonic Measurement System
Page 34 February 2013