FlexLink Spiral Elevator - Manual (Page 10)

Safety
Page 4 of 68 5478EN-3
1.2 The most important safety conditions
Before the Spiral Elevator is put in to service, the following safety
conditions must be met:
• Provide good ambient lighting.
• Equipment users should have read and understood the operating
instructions to operate, maintain or clean the machine.
• Equipment users should not reach into the machine while it is
running. Even if the machine is not running, it may be 'on', which
means it may start operating automatically.
• Safety provisions (where fitted), such as side plating, bottom
plating, emergency stops and detectors must not be removed or
deactivated while the Spiral Elevator is running.
• Before clearing of any jams, the unit should be stopped and safely
isolated.