FlexLink Spiral Elevator - Manual (Page 20)

Introduction
Page 14 of 68 5478EN-3
Configuration input / output
The configuration of the Spiral Elevator is available in different formats with
regard to input / output positions. These configuration types are expressed
in the letters A or B.
It is possible to have a configuration with which the output side is placed at
a different angle. For any special configurations please contact FlexLink.
Dimensions of the Spiral Elevator
The height of the Spiral Elevator is dependant upon the low level height
plus the number of turns of the spiral (see Technical Specification - Section
2 on page 8).
A
B