Burkert Type 0450 - Manual (Page 6)

4 - 8640-0450
G
ENERAL
N
OTES
english
Symbols
The following symbols are used in these operating instructions:
marks a work step that you must carry out
ATTENTION!
marks notes on whose non-observance your health or the functioning of the device will be
endangered
NOTE marks important additional information, tips and recommendations
Please observe the notes in these operating instructions together with the conditions of use and permitted data that are specified
in the data sheets of the Block Assembly Type 0450 with Aluminium Baseplate Type MP05, in order that the device will function
perfectly and remain operable for a long time:
• Keep to standard engineering rules in planning the use of and operating the device!
• Installation and maintenance work are only allowed by specialist personnel using suitable tools!
• Observe the current regulations on accident prevention and safety for electrical devices during operation and maintenance of
the device!
• Before interfering with the system, always switch off the voltage supply!
• Beachten Sie, daß in Systemen, die unter Druck stehen, Leitungen und Ventile nicht gelöst werden dürfen!
• Take suitable precautions to prevent unintentional operation or damage by unauthorized action!
• After interruption of the electrical or pneumatic supply, make sure the process is restarted in a well-defined, controlled
manner!
• On non-observance of these notes and unauthorized interference with the device, we will refuse all liability and the warranty
on device and accessories will become void!
Safety notes
Approvals such as Ex, UL, UR, CSA, DVGW, etc. are marked on the nameplate or with a special sticker. NOTE