Burkert Type 8642 - Manual (Page 26)

8642 - 25
english
Parameter Parameter description
DESCRIPTOR User-definable text to describe the device within
the application
DEVICE_MESSAGE User-definable message to describe the device
within the application or in the plant
DEVICE_INSTAL_DATE Date of installation of device
LOCAL_OP_ENA 0 no local operation
IDENT_NUMBER Selection of GSD file
0 profile-specific
1 manufacturer-specific (default)
VIEW_1 contains the variables:
ST_REV
MODE_BLK
ALARM_SUM
DIAGNOSIS
Abbreviations in the following table:
Memory (memory class required)
N Non-volatile parameter that must be observed in the working
cycle. It does not, however, belong to the static updating
code.
D (dynamic) The value is calculated in the block or read from another
block.
Cst (constant) The parameter does not change.
Access
r read only
r/w read / write