Burkert Type 8642 - Manual (Page 34)

8642 - 33
english
6.2.2.5 Description of the Block parameters of the transducers
• suitable for solenoid valve applications
• two proximity switches for each magnet output
• the input signals indicate the ON/OFF state of the valve
Parameter Description
VALVE_MAN Name of the valve manufacturer
ACTUATOR_MAN Name of the actuator manufacturer
VALVE_SER_NUM Serial number of valve belonging to the
device
ACTUATOR_SER_NUM Serial-number of actuator belonging to the
device
VALVE_ID Identification of valve (-type)
ACTUATOR_ID Identification of the actuator (-type)
ACTUATOR_ACTION Fail-safe position for power-loss of the
actuator resp. the valve:
0 not initialized
1 opening
2 closing
TRAVEL_COUNT Number of cycles from „open“ to „closed“
and from „closed“ to „open“.
The number range of TRAVEL_COUNT
exceeds the storage capacity of the
EEPROM