Burkert Type 8695 - Manual (Page 22)

22
Electricalinstallation/displayelements
9.8 Display elements Devicenet
note!
Breakage of the pneumatic connection pieces due to rota-
tional impact.
▶ When unscrewing and screwing in the transparent cap, do not
hold the actuator of the process valve but the connection hous-
ing (see “Fig. 17: Open control head”).
End position LED green
Device status LED
(two-colored: red/
green)
End position LED
yellow
Bus status LED (two-
colored: red/green)
Valve LED yellow
(pilot valve)
Status LED (yellow)
Fig. 18: LED display - DeviceNet
led color
Status LED flashing yellow Teach function is running
flickers yellow Puck PCB not available
End position
LEDs
5)
is lit green End position bottom
is lit yellow End position top
Valve LED
Pilot valve
is lit yellow Pilot valve is actuated
Tab. 11: Display elements - DeviceNet
note!
damage or malfunction due to penetration of dirt and humidity.
▶ To observe protection class IP65 / IP67, screw the transparent
cap in all the way.
5)
Color setting ex works.
english
Type 8695