Burkert Type 8644 - Manual (Page 62)

62
Installation
installation
Depending on the version, insert (D6, D4, D1/4) or screw (M5, M7) the connections to the corresponding
→
working connections.
Connection nipples can be used for threaded versions.
→
Inscription of the connections:
Label the inscription areas with the data of the valve connections.
→
electrical installation 8.6.
DANgEr!
risk of injury due to electrical shock!
Before reaching into the device or the equipment, • switch off the power supply and secure to prevent reactivation!
Observe applicable accident prevention and safety regulations for electrical equipment! •
Information on electrical installation may be found on the Internet under:
www.wago.com Documentation Wago I/O - System 750
Typ 8644
deutsch