Burkert Type 1094 - Manual (Page 7)

7
Basic Safety Instructions
Basic safETy 3.
insTrucTiOns
These safety instructions do not make allowance for any
contingencies and events which may arise during the installation, •
operation and maintenance of the devices.
local safety regulations – the operator is responsible for observing
•
these regulations, also with reference to the installation personnel.
DangEr!
risk of electric shock!
Before reaching into the device or the equipment, switch off the •
power supply and secure to prevent reactivation!
Observe applicable accident prevention and safety regulations
•
for electrical equipment!
Warning!
general hazardous situations.
To prevent injury, ensure:
That the system cannot be activated unintentionally. •
Installatio • n and repair work may be carried out by authorized
technicians only and with the appropriate tools.
After an interruption
• in the power supply or pneumatic supply,
ensure that the process is restarted in a defined or controlled
manner.
The device may be operated only when in perfect condition and
•
in consideration of the operating instructions.
The general rules of technology apply to application planning
•
and operation of the device.
noTE!
electrostatic sensitive components / modules!
The device contains electronic components, which react sensi-
tively to electrostatic discharge (ESD). Contact with electrostati-
cally charged persons or objects is hazardous to these compo-
nents. In the worst case scenario, they will be destroyed immedi-
ately or will fail after start-up.
Observe the requirements in accordance with EN 61340-5-1 •
and 5-2 to minimize or avoid the possibility of damage caused by
sudden electrostatic discharge!
Also, ensure that you do not touch electronic components when
•
the power supply voltage is present!
English
Type 1094 EV