Burkert Type 1115 - Manual (Page 9)

9
38 UINT8 Controller errors
x x x x x x x x
0 : EEPROM-data configuration OK
1 : EEPROM-data configuration defect
0 : EEPROM-data parametration OK
1 : EEPROM-data parametration defect
0 : EEPROM-data former condition OK
1 : EEPROM-data former condition defect
0 : EEPROM-data calibration data OK
1 : EEPROM-data calibration data defect
0 : no error at the binary input
1 : error at the binary input
0 : no error at the analogue output
1 : error at the analogue output
0 : no error at input 1
1 : error at input 1
0 : no error at input 2
1 : error at binary input 2
39 UINT16 Input errors
x x x x x x x x x
0 : no error at the thermocouple input
1 : error at the thermocouple input
0 : no error at the PT100 input
1 : error at the PT100 input
0 : no error at the first standard signal U input 1
1 : error at the first standard signal U input 1
0 : no error at the first standard signal I input 1
1 : error at the first standard signal I input 1
0 : no error at the first frequency input
1 : error at the first frequency input
0 : no error at the second frequency input
1 : error at the second frequency input
0 : no error at the second standard signal U input
2
1 : error at the second standard signal U input 2
0 : no error at the second standard signal I input
2
1 : error at the second standard signal I input 2
0 : no NTC error
1 : NTC error */
40 UINT8 Operating errors
refer to error list 3.2
41 UINT8 Configuration/parametration
0: reserve
1: process
2: configuration
3: parametration