Burkert Type 8012 - Manual (Page 32)

32
Installationandwiring
Type 8012
7.4.1. Assembling the m12 female
connector
1 2
→
Completely unscrew the
nut [1]
→
Remove the rear section of
the connector [2].
→
Wire the device (see chap.
9.2.3)
Fig. 8 : M12 multi-pin connector (not supplied, ordering code
917116)
7.4.2. Wiring a version with adjustable
m12 fixed connector
4
5
3
1 2
0 VDC
V+
(12-36 VDC)
(*)
Not connected
Pulse output
(NPN by default)
Version with pulse output
4
5
3
1 2
0 VDC
V+
(12-36 VDC)
(*)
4-20 mA
Pulse output
(NPN by default)
Version with pulse and current
outputs
Fig. 9 : Pin assignment of the M12 male fixed connector
pin of the m12 female cable available as
accessory equipment (order code 438680) color of the
wire
1 brown
2 white
3 blue
4 black
5 grey
The M12 fixed connector of the device is adjustable in position:
→
Unscrew the locknut.
→
Turn the fixed connector to the desired position, by 360° max. so
as not to twist the cables inside the enclosure.
→
Tighten the locknut using a spanner, while keeping the fixed
connector in the desired position.
12-36 VDC
+ -
(*)
1 2
3 4
5
Power supply
Load
blue
grey
white brown
Fig. 10 : NPN wiring (default) of the pulse output of a version with
M12 fixed connector
(*) Functional earth; If a direct earth connection is not possible, fit a 100 nF / 50 V
capacitor between the negative power supply terminal and the earth.
English