Burkert Type 2051 - Manual (Page 13)

13
Assembly / Installation
assemBly / insTallaTiOn 7.
safety instructions 7.1.
Danger!
danger - high pressure in the equipment!
Before loosening the lines and valves, turn off the pressure and •
vent the lines.
Warning!
risk of injury from improper assembly / installation!
Installation may be carried out by authorised technicians only •
and with the appropriate tools!
risk of injury from unintentional activation of the system and
an uncontrolled restart!
Secure system from unintentional activation. •
Following assembly, ensure a controlled restart. •
installation 7.2.
During the installation, please observe the operating instruc-
tions of the respective fitting.
pneumatic installation 7.3.
The swivel actuator can be installed in any position.
Before installation:
Make sure that the mechanical connection of the swivel actuator
→
neatly fits with the fitting to prevent friction.
Connect the pipes for the control air the connections provided for
→
this purpose on the swivel actuator.
english
Type 2051