Burkert Type 2051 - Manual (Page 7)

7
Basic Safety Instructions
Basic safeTy 3.
insTrucTiOns
These safety instructions do not make allowance for any:
Contingencies and events which may arise during the installation, •
operation and maintenance of the devices,
Local safety regulations; the operator is responsible for observing
•
these regulations, also with reference to the installation personnel.
Danger!
danger - high pressure!
Before loosening the lines and valves, turn off the pressure and •
vent the lines.
Warning!
general hazardous situations.
To prevent injury, ensure that:
The system cannot be activated unintentionally. •
Installation and repair work may be carried out by authorised •
technicians only and with the appropriate tools.
After an interruption in the power supply or pneumatic supply,
•
ensure that the process is restarted in a defined or controlled
manner.
The device may be operated only when in perfect condition and
•
in consideration of the operating instructions.
The general rules of technology apply to application planning
•
and operation of the device.
The pneumatic swivel actuator type 2051 was developed
with due consideration given to the accepted safety rules
and is state-of-the-art. However, dangers can still arise.
Failure to observe this operating manual and its operating instruc-
tions as well as unauthorized tampering with the device release us
from any liability any also invalidate the warranty covering the devices
and accessories!
english
Type 2051