Burkert Type 3003 - Manual (Page 11)

11
TechnicalData
6.4.3. electrical circuit diagrams
symbol description
FCO Limit switch ON
FCF Limit switch OFF
FC1 Additional limit switch 1
FC2 Additional limit switch 2
4 5 6 7 8 9
1
3
2
TP/PE
N
-
Ph
+
1
3
2
TP/PE
N
-
Ph
+
Open Close
Open Close
FC1 FC2
3-Point mode On-Off-Mode Feedback
Fig. 2: Open/Closed Version
If voltage is applied simultaneously to terminals 2 and 3, terminal 2 is the leading one and the actuator moves to the OPEN position.
note!
Make certain in 3-point mode that the pulse duration of a controller lasts for at least 1 second. A pause time of at least 500 ms is required
before controller activation is repeated. Observe the duty cycle specified on the type label!
Please note the circuit board must remain power supplied to allow heating resistances working.
english
Type 3003