Burkert Type 3003 User Manual
Page 16
16
Installation
7.4.1. specify position of the plug-in
jumpers
ON
OFF
Fig. 7: Plug-in
jumper K1
/ K2
Fig. 8: Plug-in
jumper
K3 OFF
Fig. 9: Plug-in
jumper
K3 ON
signal
trans-
ducer
feed-
back
plug-in jumper
K1
plug-in jumper
K2
plug-in
jumper
K3
a
B
a
B
0-10 V
0-10 V
ON
OFF
ON
OFF
OFF
0-10 V
0-20 mA
ON
OFF
OFF
ON
OFF
0-10 V
4-20 mA
ON
OFF
OFF
ON
ON
0-20 mA
0-10 V
OFF
ON
ON
OFF
OFF
0-20 mA
0-20 mA
OFF
ON
OFF
ON
OFF
0-20 mA
4-20 mA
OFF
ON
OFF
ON
ON
4-20 mA
0-10 V
OFF
ON
ON
OFF
OFF
4-20 mA
0-20 mA
OFF
ON
OFF
ON
OFF
4-20 mA
4-20 mA
OFF
ON
OFF
ON
ON
7.4.2. parameterization steps
specify direction of rotation of the shut-off valve
normal direction of rotation (preset)
G
→
Press <OPEN> pushbutton and switch on
the card (hold down pushbutton).
The GREEN LED lights up.
→
Release <OPEN> pushbutton and disconnect
the card from the power supply.
reverse direction of rotation
R
→
Press <CLOSE> pushbutton and switch on
the card (hold down pushbutton).
The RED LED lights up.
→
Release <CLOSE> pushbutton and disconnect
the card from the power supply.
specify control signal type
control signal when voltage 0 – 10 V
R
→
Press <MEM> pushbutton and switch on the
card (hold down pushbutton).
The RED LED lights up 3x.
→
Release <MEM> pushbutton and disconnect
the card from the power supply.
english
Type 3003