Burkert Type 8025 - Manual (Page 23)

23
Installation and wiring
Type 8025 UNIVERSAL
Power▶supply▶of▶
the▶device
PLC
PE PE PE
L+ L- PE P- P+
NC
Iout
PULSE
DO1
Supply
12..36Vdc
Univ
Batch
(AO1)
300 mA
(*) +
-
+
- 5-36 VDC
+
-
12-36 V DC
*)▶If▶a▶direct▶earth▶connection▶is▶not▶possible,▶fit▶a▶100▶nF/50▶V▶
capacitor▶between▶the▶negative▶power▶supply▶terminal▶and▶the▶earth
Fig. 19: PNP wiring of the DO1 transistor output
7.4.7 Wiring the Ao1 current output of a wall-mounted version, 115/230 V Ac
Insert▶the▶supplied▶stopper▶gaskets▶into▶the▶unused▶cable▶glands▶to▶ensure▶the▶tightness▶of▶the▶device.
•▶ Unscrew▶the▶unused▶cable▶gland.
•▶ Remove▶the▶transparent▶disk.
•▶ Insert▶the▶supplied▶stopper▶gasket.
•▶ Screw▶the▶nut▶of▶the▶cable▶gland.
English