Fluid Components International MT86_MT86HT Manual CE Conformance - Manual

Doc. No. 003162 Rev. F D - 1 Models MT86, MT86HT
APPENDIX D - CE CONFORMANCE FLUID COMPONENTS INTL
CONDITIONALLY APPROVED CE MARKING CONFIGURATIONS
24 VDC Factory Selectable Option
The models included in this family may be factory selected for input power of 24 VDC. Since the manufacturer
does not supply the power source or transformer for these connections, the responsibility for the conditioning of
these sources and associated compliance to the EMC Directive shall be the responsibility of the User.
Panel Mounted Control Circuit Options
Input power of 24 Vdc may be optionally selected. Sense the manufacturer does not supply the power source for
these connections, the responsibility for the conditioning of these sources and associated compliance to the EMC
Directive shall be the responsibility of the user.
Appendix D. CE Conformance
APPROVED CE MARKING CONFIGURATIONS
Approved Options
1) All process temperature ranges
2) All metallic sensor elements
3) All process connections and flanges
4) All insertion U-lengths
5) Aluminum and 300 series stainless steel NEMA 4X local and remote enclosures
6) All specified application combinations
7) All cable jackets and lengths
8) 115/230 VAC input power
Approved Part Numbers
MT86
and
MT86HT
All options conform to CE marking
requirements.
X Y X or Y options only conform to CE marking
All other configurations must be approved for CE marking conformity by FCI's Engineering Department.
1-20
B C
D E
21 22-40