GF Signet 8900 Multi-Parameter Controller - Manual (Page 11)

11 Signet 8900 Multi-Parameter
5.2 Mounting Accessories
Mfr. Part No. Description
3-8050.395 Splashproof rear cover
• Use in conjunction with liquid tight connector kits to seal wiring
ports.
• Protects rear of instrument and terminals from moisture intrusion
and corrosion.
• Suitable for indoor and outdoor installations.
• 3-9000.392 Liquid tight connector kit, NPT (3 connectors)
• 3-9000.392-1 Liquid tight connector kit, NPT (1 connector)
• 3-9000.392-2 Liquid tight connector kit, PG13.5 (1 connector)
Mfr. Part No. Description
3-0000.596-1 ¼-DIN wall mount bracket, 6.5 in. depth
• Use to mount the 8900 (without a splashproof rear cover) to a solid wall or bulkhead.
• Powder coated aluminum, black, 3.2 mm (0.125 in.) thick
3-0000.596-2 ¼-DIN wall mount bracket, 9.0 in. depth
• Use to mount the 8900 (with a Splashproof rear cover) to a solid wall or bulkhead.
• Powder coated aluminum, black, 3.2 mm (0.125 in.) thick
Mfr. Part No. Description
3-5000.598 Shelf/pipe mount bracket, ¼-DIN instrument
• Use for surface mount installations under a shelf, or on a counter or rack.
• Powder coated aluminum, black, 3.2 mm (0.125 in.) thick
• Nylon straps or other suitable fasteners may be used to secure this
bracket to a pipe.
Mfr. Part No. Description
3-8050.392 Panel adapter, ½-DIN to ¼-DIN
• Converts existing panel cutouts, up to 96 mm x 192 mm (3.8 in. x 7.6 in.),
to ¼-DIN (92 mm x 92 mm)
• Powder coated aluminum, black, 3.2 mm (0.125 in.) thick
• Neoprene gasket and machine screw hardware included
Mfr. Part No. Description
3-5000.399 Panel adapter, 5 in. x 5 in. to ¼-DIN
• Converts 127 mm x 127 mm (5 in. x 5 in.) panel cutouts to ¼-DIN
• Primarily used when replacing retired 500-series
Signet instruments with modern ¼-DIN instruments
• Injection molded black plastic (Acetal)
• Neoprene gasket and machine screw hardware included
1/2 NPT