AT&T CL81219 - Manual (Page 15)

Getting started
10
Installation options
3. Plug the telephone line cord (or DSL filter) into the wall jack. Plug the power
adapter into a power outlet not controlled by a wall switch.
4. Align the holes on the wall-mount bracket with the standard wall plate
and slide the wall-mount bracket down until it locks securely. Bundle the
telephone line cord and power adapter cord neatly with a twist tie.
Wall to tabletop installation
1. If the telephone line cord and power
adapter cord are bundled, untie them first.
2. Push the telephone base up to detach it
from the wall-mount bracket. Unplug the
telephone line cord (or DSL filter) from
the wall. Unplug the power adapter from
the power outlet.
3. See Telephone base & charger
installation on pages 5-6.
3. 4.