AT&T CL81219 - Manual (Page 21)

16
Making, answering, and ending calls
Making a call
To make a call:
Press PHONE/
FLASH
or SPEAKER, then enter the
telephone number.
The screen displays the elapsed time as you talk (in hours,
minutes and seconds).
NOTE: Pressing PHONE/FLASH to access services from your telephone service provider
does not affect the elapsed time.
On-hook dialing (predialing)
Enter the telephone number, then press
PHONE/
FLASH
or SPEAKER to
dial. Press
MUTE
/DELETE or
OFF
/CLEAR at any time to make corrections
when entering the phone number.
Answering a call
To answer a call:
Press PHONE/
FLASH
or SPEAKER.
-OR-
Press any dial pad key (0-9, * or #).
Temporary ringer silencing
Press
OFF/
CLEAR
or MUTE/
DELETE
while the telephone is ringing to silence
the ringer temporarily on that handset only. This turns off the ringer without
disconnecting the call. The next incoming call rings normally at the preset
volume.
NOTE: Each handset rings when there is an incoming call unless the ringer volume is turned
off on that handset.
Ending a call
Press
OFF/
CLEAR
or return the handset to the telephone base or charger.
Auto off
A call ends automatically when you put the handset in the telephone base or
charger.
•
•
•
Elapsed time
PHONE 0:00:30
Telephone operation